Use MATLAB

One command checks that MATLAB is ready for this board; another runs the first example.

# run from: the repo root
./devkit matlab            # is MATLAB ready to use this board?
./devkit matlab shell      # interactive, package already on the path
./devkit matlab hello      # run example 01

You need the Communications Toolbox and, for live radio, the ADALM-Pluto support package. Without it, every analysis still runs on a capture file.

Never accept MATLAB's offer to \"switch the firmware version\"

That image is for an ADALM-Pluto (Zynq-7010, AD9363). There is no undo.

Rule
full scale	int16: ±2047; double/single: ±1.0; transmit: ±32767
channels	sdrrx/sdrtx see only RX1/TX1; RX2 and TX2 through the fishball package
changing a setting	release and re-create: a property set on a running object does nothing
Simulink blocks	must run with Simulate using = Interpreted execution
listening	engage the FPGA ÷8 decimator, or the sound card starves

Everything else, including Simulink: MATLAB.